Portable Products

Fault Detector

Analyze substation transformers for defects to avoid potentially dangerous conditions caused by partial discharge. Listen for the mechanical noises produced by loose parts and the destructive arching in tap changers. Monitor the oil cooling pumps for laminar flow, turbulent flow and flow restriction. Set up a predictive maintenance schedule to periodically test transformers to prevent costly maintenance and maintain safe operating conditions.

Fault Detector FDC

The FDC detects transformer defects including: synchronous and non-synchronous partial discharge, loose parts, defective tap changers, flow restriction, turbulent flow in oil cooling pumps and high vibration levels.

Fault Detector FDA

The FDA detects transformer defects including: partial discharge, loose parts, defective tap changers, flow restriction and turbulent flow in oil cooling pumps. The FDA also detects air, steam, gas and vacuum leaks, valve leaks, faulty steam traps, worn or dry bearings, tube leaks inside power & recovery boilers.

50SU Sonic/Ultrasonic Leak Detector

The 50 Sonic/Ultrasonic Leak Detector is a single display, digital readout, portable leak detector. Bright red digits display the energy level of the sound source with four digit accuracy. A converter circuit in the leak detector converts the ultrasonic energy to audible energy for listening on headphones. The 50 measures 8″D X 2.5″H X 5″ W and weighs 3 lbs. It uses a 6V lead acid battery with an 8 hour life.

The 50SU detects air, steam, gas and vacuum leaks, valve leaks, faulty steam traps, worn or dry bearings, tube leaks inside power & recovery boilers.

50U Ultrasonic Leak Detector

Use the 50U to scan an area for high pressure air, gas or steam leaks that travel through the air. Test distances of 25 feet are common for small, 60psi leaks. A touch probe can be used to on a steam trap, valve stem or valve body to detect leaks.

The 50U detects gas, air, steam and vacuum leaks, valve leaks, faulty steam traps, worn or dry bearings.